Fabrication of polycaprolactone nanofibers through electrospinning
Abstract
Polycaprolactone nanofibers with diameters ranging from 200 to 400 nm were successfully fabricated via the electrospinning process. Scanning electron microscope was used to verify the existence of nanofibers. From SEM images the mean diameter of electrospun PCL nanofiber was found to be 366 nm. Uniform nanofibers were also observed from the electrospun PCL. Structural characterization using Fourier Transform infrared spectroscopy was used to determine its chemical structure.
Downloads
Published
Issue
Section
License
By submitting their manuscript to the Samahang Pisika ng Pilipinas (SPP) for consideration, the Authors warrant that their work is original, does not infringe on existing copyrights, and is not under active consideration for publication elsewhere.
Upon acceptance of their manuscript, the Authors further agree to grant SPP the non-exclusive, worldwide, and royalty-free rights to record, edit, copy, reproduce, publish, distribute, and use all or part of the manuscript for any purpose, in any media now existing or developed in the future, either individually or as part of a collection.
All other associated economic and moral rights as granted by the Intellectual Property Code of the Philippines are maintained by the Authors.
